Electric selection equipment and process technology---Drum type electric separator (2)

(3) YD-3A and YD-4 drum type electric separator
These two types of electric sorting machines are currently the largest electric sorting equipment in China . The YD-3A type has three drums arranged in the vertical line, while the YD-4 type has two drums arranged in parallel. The drum diameters of both types are 300. Mm, the length of the tube is 2 meters. 3A type, because the drum is arranged up and down, the conductors, medium mines and non-conductor products of the previous drum can be easily accessed into the second or third drum according to the needs of the product. This is the superiority of multiple drums. Since the electrode structure and the drum structure of the two models are completely compatible with the high-voltage power supply, they are described together. Fig. 4 is a structural diagram of the YD-3A type. Figure 5 is a structural diagram of the YD-4 electric sorter.

[next]

The difference between the two types of electric separators and other drum type electric separators is mainly the electrode structure. The corona pole is not a common nickel- chromium resistance wire, but a thin steel sheet with a thickness of 0.1 mm, which is also called For the blade electrode, install 7 blade corona poles. The electrode structure of these two types of electric separators has the advantage of fully utilizing and strengthening the corona electric field, and adopting the blade corona pole to prevent the corona pole from being burnt due to spark discharge. However, there are also serious shortcomings. It is precisely the use of corona is extremely excessive. Although the concentrate grade will be higher, the recovery rate will inevitably be low, and the amount of medium ore will be large, which will increase the difficulty in selecting the latter section.

This is mainly used for two devices currently featured titanium iron ore, cassiterite separation scheelite and other heavy minerals sorting. In addition, this machine is too cumbersome, and the processing power and effect are not ideal. The YD-4 type is more flexible and the height is greatly reduced. Fig. 6 is a view showing the electrode structure of the above two types of electric separators.

Wind Power Bearing


Located In the northwest of China, Xibei Bearing Co., Ltd. orientate to equip toChinaand service to the world. During the course of development, Xibei Bearing Co., Ltd. continuously accumulates experience, pioneering and innovative, forge ahead with determination. In accordance with the international standard and customer`s special requirement, Xibei Bearing can produce more than 6000 varieties of bearing standard and non-standard with outside diameter from40mmto3500mm.  Its products are widely used in rail transit, military industry, precision motor, petroleum machinery, metallurgy machinery, heavy truck, construction machinery, mining machinery, cement machinery and hydraulic engineering, etc. Its products are well sold all overChinaand export to over 50 countries and regions, such as Europe,America, Asia,Africa, etc.                

Wind Power Bearing

Wind Power Bearing,Wind Generator,Wind Gear Bearing,Wind Turbine Generator

Xibei Bearing Co.,Ltd. , https://www.nxzjck.com