The molybdenite crystal is a hexagonal layered or plate-like structure formed by the S-Mo-S structure along the interlayer of Fanshijian and the polar covalent bond S-Mo in the layer. The bond between the layers is weak, and the covalent bond bonding within the layer is very strong. Therefore molybdenite easily disintegrate the layer structure between in the form of sheet or plate output, which is the natural floatability Hui copper ore good reason. Practice has proved that under suitable grinding fineness, the molybdenite crystal dissociation occurs between the S-Mo-S layers, and the hydrophilic S-Mo surface accounts for a small proportion. However, when over-grinding, the proportion of S-Mo surface increases, and the floatability decreases. Although a certain amount of polar collector such as xanthate is added at this time, it is beneficial to the recovery of molybdenum ore, but the new slime produced by over-grinding Affect the flotation effect. Therefore, the selection of molybdenite should avoid and prevent over-grinding. In the production, it is necessary to adopt segmental grinding and multi-stage sorting process to gradually achieve monomer dissociation and ensure high recovery of molybdenum concentrate. The crushing of molybdenum ore generally adopts a three-stage and one-closed process, and the final product has a particle size of 12 to 15 mm. Grinding is usually carried out using a ball mill or a rod mill-ball milling process. Henderson is the only semi-self-grinding process. Flotation uses the preferred flotation method. Rough selection of molybdenum coarse concentrates, coarse sweeping of tailings to recover associated minerals or disposal. The molybdenum coarse concentrate is re-milled in two or three stages, and the final molybdenum concentrate is obtained in four or five times. The flotation agent of molybdenum ore uses a non-polar oil as a collector while adding a foaming agent. Surfactant Syntex is used as an oil emulsifier in the United States and Canada. The nature of the ore, as modifier with lime, sodium silicate gangue as inhibitors, sometimes add cyanide or sulfide minerals inhibit other heavy metals. In order to ensure the quality of molybdenum concentrate, heavy metal minerals such as copper, lead and iron contained in molybdenum concentrate, calcium oxide and carbonaceous minerals need to be further separated: Typically using sodium sulfide or sodium hydrosulfide, cyanide or copper and iron ferricyanide system; inhibition by weight of lead chromate or Knox (Nokes). If an inhibitor is used, the impurity content does not reach the quality standard, and it needs to be supplemented by chemical beneficiation: secondary copper sulfide is leached with cyanide; chalcopyrite is leached with ferric chloride solution; galena with hydrochloric acid and trichloro The leaching of the iron solution can reach the standard content. The gangue containing calcium oxide is easily muddy, so it is not necessary to over-grind the ore containing such gangue. Production is often added sodium silicate, sodium hexametaphosphate or an organic phosphate gel as gangue inhibitor or dispersant; Activated carbon can also be added CMC (carboxymethylcellulose) inhibition carbonate gangue. Finally, it can be leached by hydrochloric acid or hydrochloric acid plus ferric chloride solution. For the separation of carbonaceous minerals, it is first necessary to find out that the carbonaceous material is graphite , asphalt or coal . The floatability of these carbonaceous minerals is similar to that of molybdenum ore, but the density is small, and it can generally be removed by re-election; using hexapoly-sodium metaphosphate and CMC to suppress molybdenum float; or adding ferric chloride or water glass It is also effective to inhibit carbonaceous material with sodium hexametaphosphate; it is also one of the methods to remove organic carbon by roasting. It should be noted that the separation of all these carbonaceous minerals is currently unsatisfactory and is still a problem that has not yet been fully resolved. The SiO2 (silica) content in the gangue is too high, which is often the reason for affecting the grade of molybdenum concentrate. It has been determined that the SiO2 content decreases with the increase of the grade of molybdenum concentrate, and there is a tendency for mutual consumption. As long as the molybdenum mineral reaches the monomer dissociation fineness, the SiO2 content can generally fall below the standard. Adding activated carbon to the oil on the molybdenum surface, and adding CMC to inhibit the silicate gangue, the SiO2 content can also be reduced below the standard.
Sign Cnc Router
SIGN MAKING CNC ROUTER, great option for sign, graphic, printing, displaying, advertising industry. Precision cutting aluminum, copper alloy trim, IT trim, acrylic, etc.
Acrylic Cutting Cnc Router's applicable scope:
Cnc Router for cutting mini acrylic word's Characteristics:
10. High safety performance factor, a key operation and the host and line operation, while starting and stopping the limit, the wrong version of the alarm buzzer to improve the safety factor.
Technical parameters:
Sign Cnc Router,Sign Making Cnc Router,Cnc Router Sign Making Machine,Acrylic Sign Cnc Cutter Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com
2. With breakpoint, continuation on break point function, with homing automatic error correction function, effectively guarantee the work of a long time in the processing accuracy.
3. Unique storage design, easy to store tools, tools.
4. Using high rack gear transmission to ensure machine with high precision, fast speed, maximum speed can up to 90m / min.
5. Featured circuit accessories, a variety of protection is complete, to ensure the safe operation of spare parts and machines to reduce the failure rate.
6. Equipment control system is simple, with user-friendly design, in line with human structure, to facilitate customer operation.
7.T-slot+Vacuum table, can be easily used for all kinds of materials.
8. Machine software`s compatibility is good, compatible with tyoe3 / Artcam / Castmate / Wentai and other CAD / CAM design software.
9. Precision tool auto-checking instrumen, save time and effort, a key to start, save resources.
New technology of molybdenum ore flotation
The beneficiation method of molybdenum ore is mainly flotation, and the recovered molybdenum mineral is molybdenite. Sometimes in order to improve the quality of molybdenum concentrate, remove impurities, and then carry out chemical beneficiation of molybdenum concentrate.