The Michelin X-CRANE+ tires were developed specifically for all-terrain crane matching. This is also a reflection of Michelin's advancement of product segmentation. Now all products and markets are constantly approaching segmentation, because only the higher the degree of segmentation is, the better the matching degree of products and the reasonable utilization of resources. Three Michelin engineering tire combination products: 385/95R25 X-CRANE+, 445/95R25 X-CRANE+, 525/80R25 X-CRANE+. Having said so much, let's look at the Michelin X-CRANE+ in the end. 1, good physical condition The longevity is extended by up to 20%. The tread uses a new rubber formula with better durability. The tread pattern of the Michelin X-CRANE series is used. Use tougher carcass wire and apply C2 technology to reduce heat accumulation. At the same time, the bead design is optimized, the bead area is more robust, and the service life is extended. Tires can be grooved, grooved and refurbished like a tire, can extend the life of the tread and improve fuel performance. All in all, it reduces the frequency of tire change, reduces operating costs, and is safe, economical and environmentally friendly. Second, good fit, easy to install It is easy to install and inflate. This reduces downtime and losses due to improper installation. The geometry of the tyre and rim contact surfaces is optimized. In order to realize the performance of the tire, please note that the side marked OUTSIDE VEHICLE FOR OPTIMUM HANDLING is installed on the outside and can be installed on one vehicle at the same time. Third, good control The excellent comfort of operation and the improvement of pattern non-uniform wear provide optimal vehicle handling. Reduce the vibration generated during the operation of the crane, thereby improving driving comfort. The X-CRANE+ pattern design shortens the braking distance and expands the scope of tire application. Small blocks provide better comfort and handling, and large blocks provide better traction on soft surfaces. Fourth, economic and environmental protection X-CRANE+ tires meet global standards, except that they can be grooved and contain no aromatic compounds. There is also an ISO 14001 certification, and all Michelin factories have this certification. The impact on the environment since 2005 has been reduced by 16%. After some introduction, we have some understanding of this series of products.
Evotec Medium Voltage Generator including Synchronous Generators , EvoTec Medium Voltage Generator ,7200V 4 Pole Synchronous Brushless Generator,4 Pole Synchronous Generator.Our alternator are widely used in industry, commercial, real estate, hospital, hotel, railway, telecommunications, data-centers and mining etc.
Ambient Temperature: 40
EvoTec Medium Voltage Generator Synchronous Generators, Evotec Medium Voltage Generator ,7200V 4 Pole Synchronous Brushless Generator,4 Pole Synchronous Generator EvoTec Power Generation Co., Ltd , https://www.evotecgen.com
Michelin X-CRANE+ All-terrain Crane Tire 
Michelin 525/80R25 X-CRANE+ Tires 
Tire groove sketch 
Michelin (445/95R25 and 525/80R25) X-CRANE+ Tires 
Michelin (445/95R25 and 525/80R25) X-CRANE+ Tires 
Michelin X-CRANE+ pattern design 
Michelin X-CRANE+ Tires
The specific technical features are listed below:
Speed: 1500rpm or 1800rpm
Frequency: 50 Hz or 60Hz
Number of Poles: 4
Power: up to 3500KVA
Voltage: 110V-690V,High Voltage:3.3KV-13.8KV
Insulation: class H
Power Factor: 0.8
Voltage Regulation Rate: ±0.5%
Altitude: 1000M
Temperature Rise Class: class H
Overload:10% for 1 hour in every 12 hours
Degree of Protection: IP21 (IP23, IP44, IP54 on request)
Special Features:
EvoTec Medium Voltage Generator
