48 Cavities Thread 28mm Hot Runner Plastic Injection Cap Mold

  • Model NO.: Ys20170314999
  • Surface Finish Process: Polishing
  • Plastic Material: PE
  • Application: Household Appliances, Commodity, Home Use, Water Bottle
  • Design Software: UG
  • Standard: Standard
  • Size: 28mm/30mm/32mm/34mm/36mm/40mm
  • Mould Matieral: P20\S136\2316\#45\718/ Copper
  • Warranty: 3, 000, 000 Times
  • Gate: Pin Point
  • Transport Package: Wooden Package
  • Origin: China
  • Shaping Mode: Injection Mould
  • Mould Cavity: Multi Cavity
  • Process Combination Type: Single-Process Mode
  • Runner: Hot Runner
  • Installation: Fixed
  • Customized: Customized
  • Cavity: 2/4/8/12/16/18/20/24/28/32/36/48
  • Polish: High Polish
  • Process: Hot/Cold
  • Trademark: Yongsheng
  • Specification: SGS
  • HS Code: 8480719090
1.ADVANTAGE:
1.Saving 10%-30% cost than others.
2. Direct factory price
3. Life:3, 000, 000 time
4.2D and 3D provided
5. Quick T1  time: 25-40 days

6.More than 15 years experience 
 
2.PICTURE:
 48 Cavities Thread 28mm Hot Runner Plastic Injection Cap Mold
48 Cavities Thread 28mm Hot Runner Plastic Injection Cap Mold
48 Cavities Thread 28mm Hot Runner Plastic Injection Cap Mold
48 Cavities Thread 28mm Hot Runner Plastic Injection Cap Mold

3.MOULD  DESCRIPTION:
1.Cavity:1-72
2.Mould base material :P20 , 45# , 4CR13 , .ECT
3.Core&Cavity material : S136,718, P20,2378,2316,4CR13,P20 .ECT
4.Runner: Cold /Hot (LOCAL BRAND,HASCO,YUDO,HUSKY .ETC)
5.Life time:3,000,000 shots
6.Quick T1 time:25-40 days
7.Package:wooden case 
 

4.MOULD  MANUFACTURE  PROCESS:
Cap Mould : grinding→fly-cutter →CNC Milling→drilling→lathe→boring lathe→electric pulse →fine fly-cutter→polish→electroplate→install
 
Preform Mould: grinding→drilling→lathe→boring lathe→fine fly-cutter→polish→electroplate→install
Need vale ,itself-locking :new advanced needle vale gate system.each cavity is self-lock independently to ensure low decent ration of product.
The excellent hot runner design assures uniform heating and greatlyimproves the quality of plastic products

 
5.AFTER  SALE  SERVICE:
Any mould problem,we will provide free maintenance service
 
 
6. FLOW CHART
1 Sample or 2D,3D drawing from customer
2 Bulid 2D,3D drawing
3 CAD mould design
4 Send drawing to customer to confirm
5 Parts inspection/CNC machining/EDN machining
6 Mould assembly
7 Mould test 
8 Send sample to confiom 
9 Dilver the mould
 
7.CONTACT   ME:
 

48 Cavities Thread 28mm Hot Runner Plastic Injection Cap Mold
48 Cavities Thread 28mm Hot Runner Plastic Injection Cap Mold

 

APPLICATION FEATURES

1. Environment:The bearing is located in the lower part of the chassis, normally working in a dusty and mud splash environment, so it is with high requirement of bearing sealing performance. Working in outside, from low temperature -40 ℃ to high temperature 100℃;

2. Rotating speed:  Highest is 3000rpm;

3. Loading: Besides to bear the weight of the main rotating axis, also need to bear the uncertain axial load;

4. Eccentric Oblique angle:Bearing is used with propeller shaft(or drive shaft), need consider to compensate the installation error of the shaft, and the displacement caused by the engine vibration and frame deformation, so the oblique angle of bearing are key factor to be paid attention during bearing design.

Propeller Shaft Bearings

Propeller Shaft Bearings,Automotive Propeller Shaft Bearings,Propeller Shaft Center Bearings,Propeller Shaft Center Support Bearing

ZHEJIANG XCC GROUP CO.,LTD. , https://www.xccbearing.com