Aluminum Die Casting Pulse Valve Dust Parts products
pulse valves dust collectors products advantage
Aluminum Die Casting Pulse Valve Dust Parts Pneumatic Pulse Valve,Pulse Valve Dust Parts,Aluminum Die Casting Pulse Valve,Die-Cast Aluminum Dust Collector Valves Ningbo WEIBO Molding&Machine Co.,Ltd. , https://www.diecasting-manufacturers.com
Under the coordination of relevant offices, Hubei Green Cleaning Company drafted a 301 cleaning plan. The environmental protection workshop reviewed the plan and revised it according to the actual situation of the workshop. At 13 o'clock on the May 22th, Hubei Green Cleaning Company shipped the ice to the site. 13:46 The environmental protection workshop organized personnel to change the circulating water process. In order to make the chemical cleaning effect better, the environmental protection workshop was backwashed with fresh water for 8 minutes. The flushed water was found to be cloudy. Subsequently, Hubei Green Cleaning Co., Ltd. cleaned and replaced 301/1 and 2, during the cleaning process, the environmental protection workshop exchanged the inlet valves of 301/1 and 2 were adjusted, the cleaning work ended at 16:46, and the total chemical cleaning was 3 hours. .
After this online chemical cleaning, the flow of circulating water does not increase, the temperature at the outlet of the scrubber rapidly drops, and the temperature can be controlled at about 38 degrees without changing fresh water in the 301/1, 2 and the dry and absorbed acid concentration can be restored. 95.5% and 98.6%. The online cleaning change 301 reduces the number of downtimes of the device and reduces the secondary failure of the device during the start-up and shut-down process.
1. Die -cast Aluminium Pulse Valve Dust Parts products.
2. Strong bearing capacity.
3. Elaborated made to ex-change;
4 .Acceptable electric leakage;
5. Aluminum Die Casting suitable for communications, auto parts, lamp part series, water pump part series, power tool series, radiator part series, Aluminum Die Casting Pulse Valve Dust Parts and other series products.
Applications:
Aluminum Die Casting Pulse Valve Dust Parts also called diaphragm valve acts as a [switch" for compressed air in the dust clean blowing system for pulse bag filters. It is controlled by the electric signals from the pulse-jet control device. This system cleans the filter bags cluster by cluster with high-pressure blowing to keep the pressure resistance of the baghouse within a pre-set range, and thus ensure the processing capability and the dust-collecting efficiency of the baghouse.
1. easy & fast to set up pulse valves dust collectors
2. Formaldehyde to release a quantity to reach national standard, health protection E0
3. Design novel, variety complete, fashion, ascending life style
Jingmen Petrochemical Sulfuric Acid Unit Replaces 301 for the First Time Online Cleaning Success
Jingmen Petrochemical's environmental protection workshop successfully made the first on-line cleaning of the sulphuric acid plant 301/1 and 2 on May 22, 2009.