New car "deodorization" tips

There will be a certain odor in the new car just bought, but it is different from the newly renovated room. You can put it in for a while and then go in and check in. The odor in the new car is mainly caused by the use of materials in the interior of the car. The odors emitted by these materials in the car are harmful substances. If a large amount of inhalation is harmful to the human body. So how do we eliminate the odor of just bought a car?

1_副本1.jpg

The first move: ventilation deodorization method

In the early stage of using a new car, driving a car should develop the habit of driving with a window and driving in a ventilated manner. This can ensure that the air in the vehicle is circulated in time and accelerates the discharge of harmful gases.

The second measure: Charcoal deodorization

Those who have studied physics should know that the charcoal adsorption capacity is particularly strong. Therefore, you can buy some charcoal, wrap it in a clean, breathable gauze, and then put it into the trunk of the car, you can remove some of the car smell.

2_副本.jpg

The third measure: vinegar deodorization method

When we don't need to use a car, we can put a small bucket of vinegar in the car, because water can absorb formaldehyde, and vinegar can stabilize the formaldehyde, which can achieve the effect of eliminating odors in the car.

The fourth measure: Anion air purifier deodorization

For the qualified car owners, you can buy an anion air cleaner, about 300 yuan, this way can also remove the car smell, allowing drivers to breathe fresh air.

The fifth measure: Photocatalyst deodorization

Photocatalysts are photocatalysts developed using nanotechnology and are dedicated to the treatment of indoor air pollution. After the surface oxidation reaction, the harmful substances are decomposed into water and carbon dioxide. The photocatalyst has the advantages of strong purification ability, stable effect, no secondary pollution, low maintenance cost, etc., and is suitable for in-vehicle disinfection and pollution control, but the cost is relative to Will be more high.

Summary: Fresh air without smell is what every driver pursues, which not only guarantees our health but also allows us to follow.


Lab Seed Cleaner & Grader

The 5XZC-L laboratory seed cleaner & grader is precision equipment for particulate material cleaning and grading. It is suitable for separation of all seed types, as grain, grass seeds, flower seeds, vegetable seeds, herb seeds and so on.

Working principle:

Lab seed cleaner is mainly used for all kinds of seed processing characteristics test and research. It is also widely used for quantity high-value seeds cleaning and size classification. The seed cleaner is air screen structure. It has former and rear dust separating air pipes, so you can clean the dust, light impurities and blighted seeds from good ones. Vibrating sieve trunk is installed 3 sieve layers in the upper, middle and lower part. First sieve layer is used to separate large impurity & large seeds. Second sieve layer is used to separate small impurity & small seed. The rest seeds are qualified seeds and they go to main discharge outlet. By adjusting the frequency converter button, you can control the sieve trunk vibration and control material running speed on sieve screen surface. There are also several air volume adjusting handles to help you get the suitable air suction. So you can well manage the seed cleaning effect by adjust trunk vibration frequency and air volume. At bottom of the sieve trunk, there is an air filter. Dusty air produced after winnowing will be discharged after filtering. This is environmental protection design.

Feature:

Lab seed cleaner & grader is two air screens structure. The front and rear part both has one air cleaning system. In air cleaning procedure, it removes dust, light impurities and unfilled seeds. Vibration sieve trunk is equipped with three sieve layers which used to separate large impurity, and small impurity. After whole cleaning processing, qualified seeds are separated from impurity.

Laboratory seed cleaner and grader construction:

lab seed cleaning machine

1. Feeding hopper

2. Electromagnetism vibration feeder 3. Vibration trunk

4. Cyclone dust separator

5. Control panel

6. Machine frame

7. Drive system

8. Double air cleaning systems


Name

Laboratory seed cleaner and grader

Model

5XZC-L

Capacity

100 kg/h

Air blower power

0.75 kw

Vibration power

0.37 kw

Voltage

220V/50Hz

Vibration frequency

0-400 times/min

Amplitude

15 mm

Dimension

1500×1170×2220 mm

Air blower specification

DF-6, ,1210mmHG

Air blower motor specification

2800r/min,220V,50Hz

Vibration motor specification

YS-7124,1400 r/min














laboratory seed cleaner


Seed Grader,Small Seed Cleaning Machine,Laboratory Seed Cleaner,Lab Seed Cleaning Machine

SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com