HVOF Powder,Chromium Carbide Powder,Chromium Carbide Coating,Chromium Carbide Thermal Spray Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvaf.com
Integrated LED explosion-proof emergency light and split LED explosion-proof emergency light selection
Integrated LED explosion-proof emergency light and split LED explosion-proof emergency light selection
At present can be integrated LED explosion-proof emergency light is not particularly large, zui important problem is that there is no room for installation inside the lamp, the original open mold did not think so much, and then that time the emergency technology is not mature, there is a price The problem, in fact, manufacturers did not increase the price of this emergency , his emergency battery inside to take it on the very expensive, so so far users still feel that one type of LED explosion-proof emergency lights expensive because these, their own explosion-proof lights prices The ordinary lamp is said to be higher, and the emergency is very compelling. If it is some of these corridors, I recommend using the integrated LED explosion-proof lamp in an emergency . If it is some fire pump, the metal halide lamp will be used for split-type emergency . After all, it is better than LED. It's cheaper.
Explosion-proof emergency led lights emergency type:
Type A: The emergency lighting can be started immediately when the main power is off, or it can be started at any time during the power outage by the external switch; (there is no electricity when the power is off)
Type B: purely as emergency lighting, normally closed; (when power is off, it is on during blackout, referred to as "pure emergency ")
Type D: Can be used as normal lighting and have emergency power at the same time; (referred to as "lighting emergency dual-use")
Explosion-proof emergency light recommendation: Most of our customers use mostly B-type and D-type.
Led explosion-proof emergency light composition and advantages and disadvantages:
A, split type: Explosion-proof lighting + explosion-proof emergency electrical box (built-in emergency circuit board and the market's conventional energy-saving lithium battery pack or old-fashioned lead-acid battery pack).
Advantages: Split-type explosion-proof emergency lights Due to the separation of the explosion-proof electrical boxes and lamps, the working temperature of the lamps will not affect the emergency circuit boards and batteries in the explosion-proof electrical boxes, improve the explosion-proof performance, and the life of the emergency circuit boards and batteries.
Disadvantages: Due to split a plurality of explosion-proof electrical box housing, increasing cost and installation work.
B. Integral components: Explosion-proof lamps and electrical boxes are designed in one piece to directly install emergency circuit boards and battery packs, eliminating the need for explosion-proof electrical boxes.
Advantages: The integrated explosion-proof lights are inexpensive and easy to install.
Disadvantages: Integrated explosion-proof emergency lights can only do small power, power to do the General Assembly affect the life of circuit boards and batteries.
Explanation; The customer chooses whether to use split type and integrated explosion-proof emergency lights according to their actual needs.
Product Name:Integrated LED explosion-proof emergency light
Product power: 30 to 100W
Rated voltage: 220V
Emergency time: custom: 30 minutes, 60 minutes, and 90 minutes
Emergency type: custom: divided into two types
Product appearance: square, round
Installation square: ceiling, wall, street
Protection class: IP65
Anti-corrosion level: WF2
Brand: Sapporo explosion-proof